Concrete cracks are common in areas all across the United States. In some regions, cracked concrete is common because of soil erosion. Other areas suffer from a dry and hot climate which causes soils under the concrete to dry and shrink. Whatever the case may be, cracked concrete is not something that most homeowners want to leave untouched.

Your Guide to Concrete Crack Repair

Whether you’re looking to fix a concrete crack yourself, or simply looking for options in repairing it, we’ve got the guide you need with three ways to tackle concrete crack repair yourself.

Seal It Yourself

If the concrete around your home has cracked but not settled, an easy fix is using a concrete patch material to seal the crack from becoming any bigger. Concrete patch material can be found at any home improvement warehouse or gardening center. Before sealing the crack, it’s imperative that you clear the area of any loose gravel or cement objects that have become displaced from the surface. Concrete patch material is used in a caulk-like fashion to inject the rubbery substance into the floor. Once filled, the crack will be sealed.

Rip and Repour

Depending on the severity of your concrete crack, the best method may be to rip out the old slab and repour concrete to form a new slab. This process is not recommended for DIY, as it requires a variety of specific equipment, as well as concrete expertise that will ensure the new slab does not crack or settle easily. Rip and repour will ensure the crack is gone and your concrete looks good as new.

Mudjacking

Mudjacking or slabjacking is a process that has more recently replaced the efforts of rip and repour. Traditionally used for highways and large roads, mudjacking has become more widely used in domestic conditions to fix a concrete crack and settlement around your home. You’ll need a professional to raise the concrete, but the process of mudjacking can be easily done by an expert in your area. The technique begins with strategically drilling small holes in the desired concrete slab. A mixture of cement and ground soils are pressure pumped into the holes, and once the voided space below a cracked surface is filled, the concrete is raised by pressure to meet back where the crack had originally formed. Once leveled and sealed, the holes are filled and the concrete is restored.

Knowing how to fix a concrete crack could save you time and money while protecting the value and appearance of your home and the space around it.

Have a concrete crack on your property? Not sure what to do? Well, you can patch it yourself with a little bit of elbow grease and a bag of concrete. In fact, you won’t even need a bag of concrete but good luck finding something smaller. If you own a home or property, keeping a bag of concrete on hand isn’t a bad thing. It can help make life easier when you need to patch a crack on a sidewalk or in your driveway. Let’s look at the basic steps to patching a concrete crack.

Patching a Concrete Crack

The first step to patching a concrete crack is to buy a bag of concrete mix. You can buy this at most home improvement stores. You’ll want to make sure you have something to mix the concrete in, something to mix with and a trough to ensure an even layer of concrete is used. Anyone can patch a concrete crack, so don’t be afraid to get your hands dirty.

The first step is to clean up the crack. You can use a water hose and clean out the crack the best you can to get rid of any dirt or debris that’s fallen into it. When you’re ready to patch a concrete crack, follow the instructions on the bag of concrete mix. Once mixed, you’ll want to pour a small amount of concrete into the crack, you shouldn’t need much. Let it settle in for a few minute and use a trough to even it out. One settled after that, you can add more if necessary and even off one last time.

Make sure to mark off where the concrete patch is so nobody steps in it while it dries. It can take 24 to 48 hours for the patch to dry. Refer to the instructions on the concrete mix for better direction on the particular concrete you purchased.

Stepping on or over a crack is considered bad luck in many circles. If you see a concrete crack, what do you do? Do you avoid it? Do you scoff at bad luck? You’d be surprised at how much trouble a simple concrete crack – no matter the size – can cause for a driveway, sidewalk or patio. But what do you do when you see a concrete crack? Let’s look at the options you have for dealing with this issue before it gets out of control.

How to Deal with a Concrete Crack

If you see a concrete crack, chances are it’s the beginning of the end. As a crack grows and expands, it becomes to slowly breakdown the concrete. It can eventually force the concrete to bulge up and break further. While a small crack may not be an immediate worry, anything larger and you’ll want to contact a concrete company to come out and take a look.

In many cases, replacing the concrete is necessary to avoid further issues. Eventually the concrete crack will spread, breaking up the concrete surface even more, and then you’ll need to have it repaired and refilled anyway. If the concrete crack appears in a driveway or other large, single surface, having it repaired sooner rather than later can save you the time, money and frustration of dealing with having the surface completely replaced.

Have a concrete company come out and perform an estimate on the crack. Most companies do this free, so make sure you feel comfortable with the company and the estimate’s cost. From there, they can repair the concrete for you so you don’t have to worry about the crack spreading and causing more issues down the line. If it’s too late, they can give you an estimate on how much it’ll cost to replace the entire surface, as you’ll want to take care of that as soon as possible, too.